An Unbiased View of Drilling Rig Equipment



The BOP can shut during the nicely but more equipment is required to allow controlled launch of the properly fluids, to circulate under pressure, to bleed force, and to allow injection versus superior nicely stress.

The purpose of degassers is to remove air or fuel entrained in the mud system to be able to make certain the right density mud is recirculated down the drill pipe. When the gas or air just isn't taken out, the mud bodyweight measured within the pits could be misleading.

Crown block A crown block is the stationary segment of the block and deal with that contains a set of pulleys or sheaves through which the drill line (wire rope) is threaded or reeved and is also opposite and above the traveling block.[1][2]

The Crown Block is amongst the rig components (hoisting procedure) composed of a set list of pulleys (known as sheaves). The placement of the stationary block is especially at the highest with the rig derrick or drilling mast, exactly where the drilling line is threaded.

The monitoring, or measurement, can be achieved possibly by using the rig pumps and calculating the number of strokes required to fill the opening or by making use of a visit tank.

As a consequence of drilling use, the elevator Call area to the collar is lowered and could become pretty hazardous. As a substitute, contractors choose to use DC lifting subs. They add to journey time but significantly boost protection.

To improve performance, lots of rigs are Geared up with two sets of Kelly bars for different geological situations.

The Fingerboard is without doubt one of the drilling rig components that is utilized to rack the tubular while tripping.

Kelly hose (#nine) is a flexible, substantial force hose that connects the standpipe on the kelly (or even more particularly to your gooseneck within the swivel previously mentioned the kelly) and enables totally free vertical movement from the kelly, when facilitating the movement from the drilling fluid through the technique and down the drill string.

Derrick (#14) will be the assistance structure to the equipment accustomed to lower and lift the drill string into and out from the wellbore. This is made up of the sub-composition (construction below the drill flooring level) plus the mast.

The annular BOP is engineered to close tightly on any cylindrical human body with Proportions as big as the utmost opening ID in the BOP to dimensions as little given that the absolutely closed situation.

While in the Oilfield, duplex pumps are changed by triplex pumps. Triplex pumps of a similar electricity, are more compact and lighter than Drilling Rig Components duplex pumps. They also offer a uniform stream.

At the very best from the mast will be the crown block, which is made up of a list of sheaves (pulleys) that tutorial the drilling line and enable assistance the hoisting program.

There are several outlets about the mud manifold to attach the pressure transducer. This permits the crew to monitor the “stand pipe pressure“

The significant-stress circuit has a very vital purpose and thus all parts has to be consistently checked and managed to make sure comprehensive performance and operation.

Leave a Reply

Your email address will not be published. Required fields are marked *